Skip to main content

The creating of a hollow form box, with finial lid.

The Arizona Association of Woodturners has issued a challenge for the June meeting to turn a lidded box. I have decided to turn it from one of my favorite woods, "Tigre Caspi and Gaboon Ebony.
 I first decided that I wanted the shape to mimic female form.
The lid maybe the breast area, the start of the ebony, the shoulders and head area with a crown top piece. the head shoulders, and breast area has finish. I need to complete the crown, which will be a challenge. I thought about attempting to insert Lignum Vitae for threading  top and base for the ultimate fit.
The bottom is planned to to be rounded and maybe slightly elevated.
The crown, pyrite with inlaid gold dust. 



Comments

Popular posts from this blog

The making of a sphere jig for the wood lathe, on the fly.

Aluminum block on wood lathe.  My goal is to create a sphere jig, (sounds so much better than a ball jig). First things first, I bought the One Way drill jig at the symposium, in Phoenix this year, with the thought of mounting a router. I never thought I would be using it on aluminum. This picture shows my first attempt at making a "T" washer to use to bolt the sphere jig. The second picture has the jig repositioned, parallel to the bed ways, I like this position much better, as it allows me to plunge to the depth I require. Then I reposition it, toward the center by + 1/8" or so. Also you need to play with the speed of the lathe. I believe I was some where around 250-300 rpm. This piece is a cut off, I never measured the thickness. it is just thicker than the 2 enclosed bearing I plan to mount. Also it's thicker because I wanted to add girth, to ensure more rigidity. This picture show the center knocked out. I used the router to go as thin a...

Turnings. A wood adventure

Home made deep hollow system and bar