Skip to main content

A new beginning

Well to update you just a little. We could not sell very many tools. I attempted to transfer the business to two younger fellows, my step son and man my stepson grew up with I worked and trained under me for many years. The friend also rents a space from me. I wanted to get them to run the business with me in the back ground. This did not work out. They just could not see eye to eye on operations. So now my son and I have relocated the business to a smaller suite. We have reduced our  activities to just a few client's we feel comfortable with and also only take on work that we feel fits a less  overwhelmed by paper work. We are working on a small kitchen. We have work lined up for a mouth, and leads that may take us into the coming fall. So we are busy, and it's just the two of us in a 2 thousand square foot suite.  we moved from a 3500 square foot space that we where in for many years. We are a little cramped but we are working on making productive. I like it, the space is much nicer with heating and cooling in the office area. Much more pleasant atmosphere.
More to come.....

A view of the lathe work area

Comments

Popular posts from this blog

The making of a sphere jig for the wood lathe, on the fly.

Aluminum block on wood lathe.  My goal is to create a sphere jig, (sounds so much better than a ball jig). First things first, I bought the One Way drill jig at the symposium, in Phoenix this year, with the thought of mounting a router. I never thought I would be using it on aluminum. This picture shows my first attempt at making a "T" washer to use to bolt the sphere jig. The second picture has the jig repositioned, parallel to the bed ways, I like this position much better, as it allows me to plunge to the depth I require. Then I reposition it, toward the center by + 1/8" or so. Also you need to play with the speed of the lathe. I believe I was some where around 250-300 rpm. This piece is a cut off, I never measured the thickness. it is just thicker than the 2 enclosed bearing I plan to mount. Also it's thicker because I wanted to add girth, to ensure more rigidity. This picture show the center knocked out. I used the router to go as thin a...

Turnings. A wood adventure

Home made deep hollow system and bar