Skip to main content

Art And The Genius Within.

The theory of 10,000 hours of work as a measure of genius.
I do not wish to scare you with the amount of work that is needed to achieve genius, but would like to offer the following theory as a guideline as to how much the “Masters of Art” generally worked before achieving their status. In 2008 Malcolm Gladwell wrote a book called Outliers in which he postulated the theory that geniuses almost always worked harder, and longer at what they did as compared to others. And generally an expert level status was achieved when that artist had worked for 10,000 hours in their discipline
“The curious thing about Ericsson’s study is that he and his colleagues couldn’t find any “naturals” – musicians who could float effortlessly to the top while practising a fraction of the time that their peers did. Nor could they find “grinds”, people who worked harder than everyone else and yet just didn’t have what it takes to break into the top ranks. Their research suggested that once you have enough ability to get into a top music school, the thing that distinguishes one performer from another is how hard he or she works. That’s it. What’s more, the people at the very top don’t just work much harder than everyone else. They work much, much harder.” (Gladwell, 2008)

Comments

Popular posts from this blog

The making of a sphere jig for the wood lathe, on the fly.

Aluminum block on wood lathe.  My goal is to create a sphere jig, (sounds so much better than a ball jig). First things first, I bought the One Way drill jig at the symposium, in Phoenix this year, with the thought of mounting a router. I never thought I would be using it on aluminum. This picture shows my first attempt at making a "T" washer to use to bolt the sphere jig. The second picture has the jig repositioned, parallel to the bed ways, I like this position much better, as it allows me to plunge to the depth I require. Then I reposition it, toward the center by + 1/8" or so. Also you need to play with the speed of the lathe. I believe I was some where around 250-300 rpm. This piece is a cut off, I never measured the thickness. it is just thicker than the 2 enclosed bearing I plan to mount. Also it's thicker because I wanted to add girth, to ensure more rigidity. This picture show the center knocked out. I used the router to go as thin a

Home made deep hollow system and bar

Turnings. A wood adventure